Showing 1–25 of 38 results
10 Piece Set of Tungsten Carbide Rotary Burrs available in Plastic or Steel Casing. Optional TiCN Coating available. The high-performance tungsten carbide rotary burrs provide maximum cutting edge stability with a simultaneous high tenacity of the cutting edge.
Broach/Annular Cutter (Core Drill) 7 Piece Set 12-22mm with 19mm Weldon Shank. Maximum Cut Depth of 30mm.
Broach/Annular Cutter (Core Drill) 7 Piece Set 12-22mm with 19mm Weldon Shank. Maximum Cut Depth of 30mm.
Terrax Ejector Pin for Broach Cutters (Core Drills) with Weldon Shank 30mm Cutters
The 107-026 is a HSS blade with B10 cutting edge and long shank. It is suitable for internal and external deburring work on long-chipping materials such as steel, aluminium and plastics.
HEXAGONAL MAGNETIC Bit and drill holder – Bit shank 6.36 x 27.0 mm
The RUKO bi-metal hole saws can be used in hand and pillar drills. When employing pillar drills, use manual advance only. On easily cut materials the varied toothing ensures that the cut is more even and requires less effort. The reduction in vibrations and heat development during cutting achieves up to three times the tool…
Special Drill – CUT NEU HSS-E with an 8.0mm Diameter. Extra stable special drill for hard requirements on hand drills. Suited for clean and burr-free milling of welding spots and thin-walled work pieces without centering. Extreme high precision.
RUKO Tungsten Carbide Rotary Burrs Set stored in a convenient table display (plastic case). Each burr has a Shank Diameter of 6.0mm. The high-performance tungsten carbide rotary burrs provide maximum cutting edge stability with a simultaneous high tenacity of the cutting edge.
The ULTIMATECUT step drill revolutionizes the work process and sets new standards in machining time with time savings of up to 75%. This is achieved through its revolutionary cutting edge geometry by combining the most diverse applications and tools. Meaning less tools needed, no tool changes and ultimate flexibility.
STEP DRILL HSS Set Split point Spiral Flute 4-30mm holes in a Steel Case
Pilot drill HSS, ground, Ø 6,35 x 82,0 mm and split point in accordance with DIN 1412 C
Pilot drill HSS, ground, Ø 6,35 x 82,0 mm and split point in accordance with DIN 1412 C
Made entirely of high-alloyed HSS tool steel. For metric thread M 3 – M 12 according to DIN ISO 13 The threads are cut in one process. To cut an external thread, the workpiece must already have the nominal diameter of the desired thread. The die is set and rotated until the desired thread length…
Suitable for steel (such as T-brackets, large sheets), cast iron, non-ferrous and light metals.
Suitable for steel (such as T-brackets, large sheets), cast iron, non-ferrous and light metals.
Suitable for steel (such as T-brackets, large sheets), cast iron, non-ferrous and light metals.
Suitable for steel (such as T-brackets, large sheets), cast iron, non-ferrous and light metals.
No products in the basket.